In Greensboro, retaining wall installation typically starts around $30 per square foot, while repairs begin at $1,500. Prices vary based on wall material, height, site accessibility, and soil conditions, but we're here to help you understand the factors and get a fair, transparent estimate.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Retaining Wall Installation | From $30/sq ft | Design and construction of new retaining walls for sloped clay yards, driveway cuts and terraced gardens, built with proper footings, gravel backfill and drainage so wet Triad clay cannot push them out of line. |
| Retaining Wall Repair | From $1,500 | Repair of leaning, bowing, cracked or settling retaining walls, from drainage correction and tieback anchors to partial rebuilds that stop a failing wall on a clay slope before it becomes a collapse. |
| Retaining Wall Replacement | From $35/sq ft | Full tear-out and replacement of failed or end-of-life walls, including rotting landscape timber and railroad tie walls, with demolition, haul-away, new drainage and modern engineered materials suited to clay ground. |
| Concrete Retaining Walls | From $35/sq ft | Poured concrete and reinforced CMU block retaining walls with engineered footings, rebar and weep holes, the strongest option for tall walls, steep driveway cuts and tight older lots near downtown and the college neighborhoods. |
| Block & Segmental Retaining Walls | From $25/sq ft | Segmental retaining walls (SRW) in Allan Block, Versa-Lok and Keystone systems, mortarless engineered block with geogrid reinforcement, ideal for subdivision backyards, terraces, curves and garden walls. |
| Boulder & Natural Stone Walls | From $25/sq ft | Boulder and natural stone retaining walls that blend into wooded, rolling landscapes, machine-placed granite and fieldstone construction with proper base preparation and drainage for a natural, durable finish. |
| Timber Retaining Walls | From $20/sq ft | Pressure-treated timber walls for garden beds and low terraces, a budget-friendly option, with honest guidance on when timber makes sense in humid clay ground and when a longer-lasting material is the better call. |
| Slope Stabilization & Erosion Control | Free estimate | Slope stabilization with terraced retaining walls, geogrid reinforcement and erosion control, protecting homes, driveways and yards on sloped lots, creek banks and cut-and-fill subdivision grades. |
| Retaining Wall Drainage | From $2,500 | Drainage systems that make walls last: French drains, weep holes, gravel backfill and waterproofing that relieve hydrostatic pressure, the number one cause of retaining wall failure in dense clay soil. |
| Railroad Tie Wall Replacement | From $35/sq ft | Removal and replacement of aging railroad tie and landscape timber walls from the 1980s and 90s subdivisions, creosote-treated tie demolition and haul-away, new gravel backfill and drainage, and a rebuild in segmental block, concrete or natural stone. |
| Leaning & Collapsed Wall Repair | From $2,500 | Priority response for leaning, bulging and collapsed retaining walls on saturated clay, stabilization with tieback anchors, drainage correction to relieve hydrostatic pressure, and partial or full rebuilds when a wall is past saving. |
What Affects the Price
- Wall material and design : Concrete, block, natural stone, and timber have different material and labor costs, impacting the overall price per square foot.
- Wall height and length : Taller and longer walls require more materials, engineering, and labor, increasing the total cost.
- Site accessibility and soil conditions : Difficult access, sloping terrain, or poor soil may require extra equipment, excavation, or stabilization, adding to the cost.
- Permits and engineering requirements : Walls over a certain height often require permits and engineered plans, which can add to the project cost.
What's included
- Travel included across the Greensboro area
- Professional labor & equipment
- Debris removal & site haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, gather details about your wall's dimensions, material preference, and any visible issues like leaning or cracking. Before calling (336) 203-7877, clear the area for inspection and note any drainage problems. Our estimate includes a site assessment, material and labor costs, permits, and cleanup, ensuring no surprises.
Pricing FAQ
Why do retaining wall prices vary so much?
Prices vary due to material choice, wall size, site conditions, and complexity. For example, timber walls start at $20 per square foot, while concrete walls start at $35 per square foot. Repairs can range from $1,500 to over $2,500 depending on the damage.
Do you offer free estimates?
Yes, we provide free estimates for slope stabilization and erosion control, and competitive quotes for all services. Call (336) 203-7877 to schedule your appointment.
What payment methods do you accept?
We accept cash, checks, and major credit cards. Financing options may be available for larger projects; please ask for details during your estimate.